How To Clean Registry Windows 8.1 Manually

This guide shows you how to gear up a corrupted registry for the following Windows versions: Windows XP, Vista, 7, eight, 8.one, or ten.

Contents

• one Fix a corrupt registry in Windows XP
• 2 Fix a corrupt registry in Windows Vista
  • 2.i Startup Repair
  • 2.two Upgrade Install
  • 2.3 Control Prompt
• 3 Set up a corrupt registry in Windows 7
  • 3.1 Startup Repair
  • 3.2 Upgrade Install
  • 3.three Command Prompt
• 4 Fix a decadent registry in Windows 8 or eight.1
  • iv.ane Run Automatic Repair
  • 4.2 Refresh
  • 4.3 Reset
• 5 Fix a corrupt registry in Windows 10
  • 5.i Run Automatic Repair
  • five.ii Refresh
  • five.3 Reset
• half dozen Troubleshooting
  • 6.1 Registry permissions in Windows XP
• vii More than Information
  • 7.1 Back up Links
  • 7.2 Applicative Systems

Fix a corrupt registry in Windows XP

To prepare a corrupt registry on a Windows XP organization, follow these instructions:

1. Insert the Windows XP setup CD and restart the computer
2. Printing any key to kicking from the CD
3. Printing R to access Repair Console
4. Enter the Ambassador countersign. When the Command Prompt appears, type the following commands, one at a time and press Enter later each control, replacing C: with the Windows' drive letter of the alphabet:

   md tmp copy c:\windows\system32\config\arrangement c:\windows\tmp\system.bak copy c:\windows\system32\config\software c:\windows\tmp\software.bak copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak copy c:\windows\system32\config\security c:\windows\tmp\security.bak copy c:\windows\system32\config\default c:\windows\tmp\default.bak

   

   Bankroll up current registry hives

   delete c:\windows\system32\config\organization delete c:\windows\system32\config\software delete c:\windows\system32\config\sam delete c:\windows\system32\config\security delete c:\windows\system32\config\default

   

   Deleting current registry hives

   re-create c:\windows\repair\system c:\windows\system32\config\system copy c:\windows\repair\software c:\windows\system32\config\software copy c:\windows\repair\sam c:\windows\system32\config\sam copy c:\windows\repair\security c:\windows\system32\config\security copy c:\windows\repair\default c:\windows\system32\config\default

   

   Restoring registry hives from a repair folder

5. Type exit and remove your CD:

   go out

6. Press Enter
7. Restart your computer
8. Boot into Safe Manner past repeatedly pressing the F8 key after booting until the Startup Options carte appears
9. Choose to kick into Condom Mode
10. Get-go Windows Explorer (or open any folder or open My Computer)
11. Click Tools
12. Click Folder Options
13. Get to the View tab
14. At the Under hidden files and folders, select Show hidden files and folders and so click the Hide protected operating arrangement files (Recommended) bank check box to be cleared (unchecked)
15. Click Yes to confirm these actions

    

    Windows XP show hidden files screen

16. Go to My Computer > C:\ drive or the drive where you installed your Windows
17. Click on the System Volume Information folder.If you receive Admission denied, please follow these guidelines to get access to that folder: https://neosmart.net/wiki/how-to-gain-access-to-the-system-v….
    You lot're most likely to receive Admission denied if your Windows XP is on NTFS and not on FAT32.
    If it's on FAT32, y'all can continue the steps beneath.
18. Open up whatever folder that wasn't created at the current time, due east.g. when you logged into the computer at this session.You lot can check this by correct clicking on the first binder and check its date.The title format of these folders is something like this:

    _restore{87BD3667­3246­476B­923F­F86E30B3E7F8}

19. Open any              RP              folder in that folder, e.g. RP1, and become to              Snapshot.These are called Restore Points. Here is an example of path:

    C:\Arrangement Book Data\_restore{D86480E3­73EF­47BC­A0EB­A81BE6EE3ED8}\RP1\Snapshot

20. From the Snapshot folder, re-create the following files to C:\Windows\Tmp
    • _REGISTRY_MACHINE_SAM
    • _REGISTRY_MACHINE_SYSTEM
    • _REGISTRY_MACHINE_SOFTWARE
    • _REGISTRY_MACHINE_SECURITY
    • _REGISTRY_USER_.DEFAULT
21. Once copied, rename these files in the Tmp folder (not the Snapshot folder) as shown below:
    • Rename _REGISTRY_USER_.DEFAULT to DEFAULT
    • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
    • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
    • Rename _REGISTRY_MACHINE_SYSTEM to Organization
    • Rename _REGISTRY_MACHINE_SAM to SAM
22. Restart your computer and boot from the CD again
23. Printing R to access Recovery Console
24. Once Command Prompt has loaded, blazon the following commands, each at a fourth dimension, press Enter after each command:

    del c:\windows\system32\config\sam del c:\windows\system32\config\security del c:\windows\system32\config\software del c:\windows\system32\config\default del c:\windows\system32\config\system

    

    Deleting electric current registry hives

    Continue with these commands:

    re-create c:\windows\tmp\software.bak c:\windows\system32\config\software re-create c:\windows\tmp\organisation.bak c:\windows\system32\config\arrangement copy c:\windows\tmp\sam.bak c:\windows\system32\config\sam copy c:\windows\tmp\security.bak c:\windows\system32\config\security re-create c:\windows\tmp\default.bak c:\windows\system32\config\default

    

    Restoring registry hives from the backup

25. Type exit, press Enter, remove your CD:

    get out

26. Restart your computer
27. Once restarted, become to Organization Restore and click on Restore to a previous betoken:
    • Click Start
    • Become to All Programs
    • Select Accessories
    • Then select Tools
    • Click Organisation Restore
28. Follow the System Restore wizard steps

Fix a corrupt registry in Windows Vista

To gear up a corrupt registry in Windows Vista, y'all tin try any of the following:

• Run Startup Repair
• Perform an Upgrade Install
• Copy fill-in files from the RegBack folder using Command Prompt

Startup Repair

To run Startup Repair, follow these steps:

1. Insert the original Windows Vista DVD in the disc tray
2. Boot from the DVD
3. Choose a language and keyboard layout
4. At the Welcome screen, click on Repair your computer

   

   Windows Vista Repair Your Computer Menu

5. Choose your operating system from the list
6. Click Next
7. At the System Recovery Options window, click on Startup Repair

   

   Windows Vista System Recovery Options

8. Follow the instructions to complete the process

Upgrade Install

An Upgrade Install may fix a corrupt registry as it volition install Windows Vista again without affecting your personal files.

While an Upgrade Install procedure shouldn't touch your personal files, backup your files before yous keep.

Before you keep with the gear up of instructions below, please note:

• If your Windows Vista has SP1 (Service Pack i) installed, your original installation DVD also must have SP1.
• If your Windows Vista has SP2 (Service Pack 2) installed, your original installation DVD besides must take SP2.

The instructions are:

1. Log into Windows Vista as an Administrator
2. Insert the Windows DVD in the disc tray

   Do non boot from the DVD at kick. Yous must insert the Windows Vista DVD while yous're logged in as an Administrator in Windows Vista.

3. If AutoPlay doesn't open up the DVD automatically, go to My Computer and double­-click on the DVD drive
4. Click Install Now

   

   Windows Vista Repair Your Figurer Menu

5. Select Practise no get the latest updates for installation.After you perform the Upgrade Install, yous can manually update Windows Vista with the latest updates bachelor.
6. Practise not type the license key
7. Leave the Automatically activate Windows when I'm online option unchecked
8. Click Next
9. At the Do yous want to enter your product fundamental now? question, select No
10. Select what type of Windows Vista you purchased and then check the I have selected the edition of Windows that I purchased option
11. Click Adjacent
12. Click Upgrade
13. Follow any instructions left and remove the DVD

After you performed the Upgrade Install, add the license cardinal:

1. Kicking into Windows Vista
2. Open Control Panel
3. Get to System
4. At the Windows activation department, click Change production key

Command Prompt

To replace the registry in a Windows Vista system, follow these steps:

1. Open Command Prompt
2. Type C:\, where C: is the alphabetic character of the drive where your Windows Vista is installed:

   C:\

3. Press Enter
4. Type cd Windows\System32\Config
5. Printing Enter
6. Type MD Temp and printing Enter
7. Type the following commands and press Enter after each:

   copy BCD­Template Temp copy COMPONENTS Temp copy DEFAULT Temp copy SAM Temp copy SECURITY Temp copy SOFTWARE Temp re-create Arrangement Temp

   

   Backing upwards the registry hives

8. Blazon the post-obit commands and press Enter afterward each:

   ren BCD­Template BCD­Template.bak ren COMPONENTS COMPONENTS.bak ren DEFAULT DEFAULT.bak ren SAM SAM.bak ren SECURITY SECURITY.bak ren SOFTWARE SOFTWARE.bak ren SYSTEM Arrangement.bak

   

   Renaming the erstwhile the registry hives

9. Then blazon these commands, 1 by one, and press Enter afterwards each:

   copy Regback\BCD­Template BCD­Template copy Regback\COMPONENTS COMPONENTS copy Regback\DEFAULT DEFAULT copy Regback\SAM SAM re-create Regback\SECURITY SECURITY copy Regback\SOFTWARE SOFTWARE copy Regback\SYSTEM Organisation

   

   Restoring the registry hives

Prepare a corrupt registry in Windows seven

To fix a decadent registry in Windows 7, you lot can try whatsoever of the post-obit:

• Run Startup Repair
• Perform an Upgrade Install
• Copy backup files from the RegBack binder using Command Prompt

Startup Repair

To run Startup Repair, follow these instructions.

Method #ane

1. Insert the original Windows 7 installation DVD in the disc tray
2. Reboot the calculator
3. Press any key when it says "Press any primal to boot from CD or DVD.."
4. Select a language and keyboard option
5. Click Repair your calculator
6. Select your operating organization
7. Cull Startup Repair

   

   Windows 7 System Recovery Options Screen

8. Follow the wizard instructions to consummate the procedure

Method #2

1. Restart your computer
2. Printing the F8 cardinal several times during booting before the Windows 7 logo appears
3. At the Advanced Options screen, select Repair your computer

   

   Advanced Kicking Options on Windows 7

4. Select a keyboard and language
5. Select Startup Repair

   

   Windows 7 Organisation Recovery Options Screen

6. Follow the sorcerer instructions to consummate the process

Upgrade Install

An Upgrade Install may fix a corrupt registry as this pick will install your Windows seven again without affecting your personal files.

While Upgrade procedure shouldn't touch your personal files, backup your files before you continue to brand sure.

The instructions are:

1. Boot into Windows 7

   Important: You need to run the Windows vii DVD while yous're logged in Windows 7.

2. Insert the Windows vii DVD
3. If AutoPlay doesn't open automatically, open the DVD directly from Calculator
4. Click Install At present
5. Make sure the I desire to help make Windows installation better choice is unchecked
6. Click Go online to get the latest updates for installation
7. Accept the license terms
8. Click Next
9. Click Upgrade
10. Uncheck the Automatically actuate Windows when I'thousand online option
11. Click Next
12. Click Ask me later at the Help protect your figurer and improve Windows automatically screen. You tin can install updates for your Windows vii once this process is washed.
13. Continue with the instructions to complete the upgrade

In one case this process is done, go and activate your license key:

1. Go to Command Panel
2. Go to System
3. At the Windows activation section, click Change production key

Command Prompt

To supplant the registry in a Windows seven system, follow these steps:

1. Open Control Prompt
2. Type C:\, where C: is the letter of the drive where your Windows 7 is installed
3. Press Enter
4. Type cd Windows\System32\Config
5. Press Enter
6. Type Physician Temp and press Enter
7. Type the following commands and press Enter:

   re-create BCD­Template Temp copy COMPONENTS Temp copy DEFAULT Temp re-create SAM Temp re-create SECURITY Temp copy SOFTWARE Temp copy SYSTEM Temp

   

   Backing up the registry hives

8. Type the following commands and press Enter after each:

   ren BCD­Template BCD­Template.bak ren COMPONENTS COMPONENTS.bak ren DEFAULT DEFAULT.bak ren SAM SAM.bak ren SECURITY SECURITY.bak ren SOFTWARE SOFTWARE.bak ren Arrangement SYSTEM.bak

   

   Renaming the old the registry hives

9. Then type these commands, one by one, and printing Enter after each:

   copy C:\Windows\System32\Config\Regback\BCD­Template C:\Windows\System32\Config\BCD­Template copy C:\Windows\System32\Config\Regback\COMPONENTS C:\Windows\System32\Config\COMPONENTS copy C:\Windows\System32\Config\Regback\DEFAULT C:\Windows\System32\Config\DEFAULT copy C:\Windows\System32\Config\Regback\SAM C:\Windows\System32\Config\SAM copy C:\Windows\System32\Config\Regback\SECURITY C:\Windows\System32\Config\SECURITY copy C:\Windows\System32\Config\Regback\SOFTWARE C:\Windows\System32\Config\SOFTWARE copy C:\Windows\System32\Config\Regback\SYSTEM C:\Windows\System32\Config\Organisation

   

   Restoring the registry hives

Set up a decadent registry in Windows eight or 8.i

To repair a decadent registry in Windows 8 or viii.1, you have these options:

• Run Automated Repair
• Refresh. The Refresh option will not bear on your files. Windows 8 volition reinstall whatsoever applications you installed and create a copy of these applications on your desktop, merely backup your data before you do a refresh.
• Reset. A Reset option volition remove all your personal files and delete whatsoever settings or configuration yous did on your computer.

Run Automatic Repair

To run Automatic Repair which will try to set a corrupt registry on your Windows 8 or eight.ane system, follow these steps:

1. Open the Settings console
2. Get to Full general
3. At the Advanced Startup panel, click Restart now

   

   Windows 8 Advanced Startup

4. At the Choose an selection screen, click Troubleshoot
5. At the Avant-garde Options screen, click Automated Repair
6. Choose an account and login, when prompted to do so
7. Automatic Repair should now starting time and your reckoner may reboot during this process

Windows 8 Advanced Startup screen

Refresh

To perform a Refresh on your Windows 8 or Windows viii.1 system, follow these steps:

1. Go to the Settings panel
2. Become to Change PC Settings
3. Click Update and recovery
4. Click Recovery
5. At the Refresh your PC without affecting your files section, click Get started
6. Follow the instructions to consummate the refresh procedure

Windows 8 Recovery Screen

Reset

To do a Reset of your Windows viii or Windows 8.i system, follow these steps:

A Reset procedure will erase personal data from your reckoner. Fill-in your files before you go on.

1. Go to Settings > Change PC Settings
2. Click Update and recovery
3. Click Recovery
4. At the Remove everything and reinstall Windows section, click Get started
5. Follow the instructions to consummate the refresh procedure

Windows 8 Recovery Screen

Set a corrupt registry in Windows 10

To repair a decadent registry in Windows ten, you have these options:

• Run Automatic Repair
• Refresh. The Refresh option will not affect your files. Windows 10 volition reinstall any applications you installed and create a copy of these applications on your desktop, merely fill-in your data earlier you do a refresh.
• Reset. A Reset option will remove all your personal files and delete any settings or configuration you lot did on your computer.

Run Automatic Repair

To run Automatic Repair which will try to ready a corrupt registry on your Windows 10 system, follow these steps:

1. Open the Settings panel
2. Go to Update & Security
3. At the Recovery tab, click Advanced Startup ->Restart now
   

   

   Windows 10 Avant-garde Startup

4. At the Choose an option screen, click Troubleshoot
5. At the Avant-garde Options screen, click Automated Repair
6. Choose an business relationship and login, when prompted to do and so
7. Automatic Repair should now start and your computer may reboot during this process'

Windows 10 Avant-garde Startup screen

Refresh

To perform a Refresh on your Windows 10 arrangement, follow these steps:

1. Get to the Settings panel
2. Become toUpdate and Security
3. Click Recovery
4. ClickGet Started
5. At the Reset This PC section, click Get started
6. Click Keep My Files
7. Follow the instructions to complete the refresh procedure

Windows 10 Recovery screen

Reset

To do a Reset of your Windows x system, follow these steps:

A Reset process will erase personal data from your calculator. Fill-in your files before you continue.

1. Go to the Settings panel
2. Get toUpdate and Security
3. Click Recovery
4. ClickGo Started
5. At the Reset This PC section, click Get started
6. ClickRemove Everything
7. Follow the instructions to complete the refresh procedure

Windows ten Recovery screen

Troubleshooting

Registry permissions in Windows XP

In Windows XP (simply the Professional person version), the permissions of the registry tin block yous from editing certain keys.

Method #one

To unblock this and fix the permissions, follow these steps:

1. Open up Control Prompt
2. Type this command:

   secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose

3. Printing Enter

Fixing permissions with secedit

Method #2

If Method #1 doesn't piece of work to fix the permissions, endeavor these steps instead:

1. Download SubInACL Tool from Microsoft directly: http://www.microsoft.com/en-united states/download/details.aspx?id=2351…
2. Run the .exe file
3. Open Control Prompt
4. Type this command and press Enter:

   cd "%ProgramFiles%\Windows Resources Kits\Tools

5. Enter the following commands and printing Enter after each:

   subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=organisation=f subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f  subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f subinacl /subdirectories %SystemDrive%\ /grant=administrators=f /grant=system=f

6. Restart the computer

Fixing permissions with SubInAcl

More than Information

Back up Links

• Easy Recovery Essentials for Windows – our repair and recovery disk.

  It'due south an piece of cake-to-apply and automatic diagnostics disk. Information technology's available for Windows 8, Windows vii and Windows Vista. It'due south besides available for Windows XP and Windows Server.

  Read more at Windows Recovery Disks.

• The NeoSmart Back up Forums, fellow member-to-member technical support and troubleshooting.
• Become a discounted price on replacement setup and installation discs: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10.

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

• Windows XP (all editions)
• Windows Vista (all editions)
• Windows 7 (all editions)
• Windows 8 (all editions)
• Windows 8.1 (all editions)
• Windows ten (all editions)

Propose an edit

Source: https://neosmart.net/wiki/fix-registry/

Posted by: smithsamphy.blogspot.com

Share this post